Army FIRES Structural Pant

Share:

Custom Order

Ricochet’s Army FIRES Structural Pant was developed to meet the needs of the US Army.  This Structural Fire Gear was designed to provide protection from physical hazards, flame resistance, and a liquid barrier to protect against chemical and bloodborne pathogen exposures while limiting the heat stress and load on the wearer. The garments are certified to NFPA 1971, Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting.

Product Information

Army FIRES Structural Pant

Pant Features

  • Ricochet Army FIRES Structural Pant - Maximum Mobility design turnout pants tailored to reduce stress.
  • Standard fly with hook & dee with hook and loop closure
  • Belt and Belt loops
  • Boot cut pant hems to reduce wear
  • Standard includes 3" segmented, Lime -Yellow 3M™ Comfort trim at leg cuff
  • Two 10" x 10" x 2" full bellows hip pockets with 5" interior kevlar reinforcement
  • Pleated flex knee with Ara-shield™ reinforced knee and enhanced thermal protection with silicone padding in thermal
  • Ara-shield™ reinforced cuffs
  • Padded, parachute style, H-back suspenders with snap style attachments

Customization Options

  • Pioneer™ Gold 6.6 oz outer shell and a Synergy™ 2L with CROSSTECH® Black 2L liner system.
    Composite provides performance results of: THL 279.30 W/m2, TPP39.3 before washing & 46.5 after 5 washings
  • Gemini™ Natural 7.5 oz outer shell and a Caldura® ELITE SL2i - 7.8 oz with CROSSTECH® Black 2L liner system
    Composite provides performance results of: THL 253.58 W/m2, TPP41.0 before washing & 49.3 after 5 washings

  • Gemini™ Natural 7.5 oz outer shell and a Caldura® ELITE SL2i - 7.8 oz with CROSSTECH® Black 2L liner system
    Composite provides performance results of: THL 253.58 W/m2, TPP41.0 before washing & 49.3 after 5 washings

  • Reflective Lettering - Add up to ten (10) 2" Letters or eight (8) 3" Letters on back

  • Throat Tab - approximately 9" x 5", folds back on itself for storage

  • Removable Knee – Removable Ara-shield® knee Reinforcements

  • Search Pocket – pocket is 5" x 8" x 2", located on back of calf, with flap

Care and Use

This garment should be washed separately from other garments and all zippers or hooks & loops should be closed. For coats, the DRD should be removed. Machine wash in temperatures of 40° C or 140° F using the “Permanent Press” setting and using liquid detergent. Hang to dry. Do not machine dry. Do not use chlorine bleach. Discoloration of any component could possibly be an indication that protective qualities have been compromised. Clothing must be inspected after each use to ensure continued performance. Detailed instructions can be found below.

Related Products